探头之家 Probemart.com ,中国高频&脉冲功率电子测试用电压探头及交直流及脉冲电流传感器,高速电流与电压校准源,综合应用选型第一平台!

联系我们 加入收藏
品牌Tektronix
产地美国


 



A621 & A622 Datasheet

 

DS_FeaturesBenefitsContainer

The A600 Series current probes are specifically designed to support measurements with the TekMeter® or oscilloscope.

Features and benefits

  • A621

    • AC – 5 Hz to 50 kHz

    • 100 mA to 2000 A peak

    • For DMMs and oscilloscopes

    • Clamp on

  • A622

    • AC/DC – 100 kHz

    • 50 mA to 100 A peak

    • For DMMs and oscilloscopes

 

Applications

  • Motor drives

  • Inverters

  • Power supplies

  • Avionics

 

A621 2000 Amp AC Current probe/BNC

This industrial-style clamp-on probe has a BNC connector and can be used with a shrouded banana plug adapter 1 so it can be used on digital multimeters, TekMeter, and oscilloscopes. The A621 can measure AC currents from 100 mA to 2000 A peak over a frequency range of 5 Hz to 50 kHz. It provides a 1 mV, 10 mV, or 100 mV output for each Amp measured.

1 For instruments with banana jack inputs, Tektronix part number 012-1450-00 Female BNC to banana lead adapter is required.

A622 100 Amp AC DC Current probe/BNC

This "long nose" style clamp-on probe uses a Hall Effect current sensor to provide a voltage output to oscilloscopes. It has a BNC connector and can be used with a shrouded banana plug adapter 1 so it can also be used on digital multimeters, TekMeter, and oscilloscopes. The A622 can measure AC/DC currents from 50 mA to 100 A peak over a frequency range of DC to 100 kHz. It provides 10 mV or 100 mV output for each Amp measured.

Recommended products

TPS2000, TDS1000B, TDS2000C, and TDS3000C Series oscilloscopes and DMM4020 1, DMM4040 1, and DMM4050 1 digital multimeters.

Specifications

All specifications are guaranteed unless noted otherwise. All specifications apply to all models unless noted otherwise.

Characteristic

A621

A622

Frequency range

5 Hz to 50 kHz

DC to 100 kHz

Maximum input current

2000 A peak

100 A peak

Output

1 mV/A, 10 mV/A, 100 mV/A

10 mV/A, 100 mV/A

Maximum conductor diameter

54 mm (2.13 in.)

11.8 mm (0.46 in.)

Termination

BNC 2

 

BNC 2

 

Maximum bare-wire voltage

600 V (CAT III)

600 V (CAT III)

Safety

UL3111-2-032, CSA1010.2.032, EN61010-2-032, IEC61010-2-032 

UL3111-2-032, CSA1010.2.032, EN61010-2-032, IEC61010-2-032 

*近期发售 (请跟销售询问)

联系我们


ProbeMart 网站二维码
探头之家-专业测量探头平台
联系人:邱小姐
电话:0731-85260926
邮箱:sales@jectronic.com
网址:www.probemart.com
地址:湖南省长沙市雨花区环保中路289号长沙屿A3栋1015室
快速联系>

咨询热线

0731-85260926 18665876229