Cybertek coaxial shunt CSE050M10(type medium-power) resistor SiC/GaN power device double-pulse dynamic test 5 W

Product Overview:

With the rapid development of modern power electronics, the application of SiC/GaN is becoming increasingly widespread, and engineers need to measure frequencies up to several hundred

kHz, high-speed pulsed current with currents up to tens of amperes. Traditional high-frequency current probe (such as our company's high-frequency AC/DC probe HCP8000 series)

It contains an iron core and a shielding layer, and these materials experience significant loss and heating under the action of high-frequency current (refer to the HCP8000 series manual)

Current frequency derating curve), so it happens that when engineers measure these circuits, current probe gets burned out. coaxial shunt is a type of pure

The structure of the resistor does not increase losses under high-frequency currents, making it very suitable for detecting high-frequency currents.

The connection method of the CSE series coaxial shunt Ultrafast Current Shunt (UFCS) is as follows:

When using the CSE series coaxial shunt, the user needs to use two sets of nuts to clamp two circuit boards, which correspond to the conduction of current respectively.

Input and output.

The company's bolt-type coaxial shunt fixed mechanical structure adopts a brand-new high-reliability design, which can greatly reduce users over-tightening.

The nut causes the possibility of internal structure damage of coaxial shunt.

Product features:

 High bandwidth: Maximum bandwidth 1.5GHz

 No high frequency insertion loss

 High-reliability bolt-type structure

 Three resistance values of 0.005Ω-0.05Ω are available to choose from

 Maximum withstand transient energy 20 joules, suitable for high current measurement

 Current measurement applicable to SiC and GaN semiconductors