Cybertek high-voltage differential probe DP6350 (3500 V/70 MHz) isolated voltage

The DP6000 series high-voltage differential probes are high-voltage differential probes with floating ground measurement capability. Their bandwidth reaches up to 70MHz, meeting the needs of most testing systems; a wide range of measurement options is available, and their differential voltage measurement range satisfies the requirements of most test circuits; users can enter test mode to adjust the bias voltage. If offset occurs after long-term use of the probe, users can enter this mode to adjust the bias and achieve zeroing; electronic touch buttons extend the service life; a 5MHz bandwidth limit function is selectable, allowing measurement of the switching frequencies of FETs in most switching power supplies while filtering out higher-frequency noise and interference; the probe features a sound and light alarm function, which can be manually muted for more user-friendly operation; a USB power interface makes usage more convenient and flexible; the probe is equipped with a standard BNC output interface, compatible with oscilloscopes from any manufacturer (the oscilloscope input impedance should be set to 1MΩ; if 50Ω is selected, the attenuation factor will double) to measure the waveform of the circuit under test; an automatic save function prevents repeated operations after power loss. The probe has good common-mode noise suppression capability, with high input impedance and low capacitance at the input, enabling accurate and high-speed measurement of differential voltage signals. It can be widely used for the development, debugging, or repair of switching power supplies, inverters, electronic ballasts, variable-frequency appliances, and other electrical power devices.