Cybertek high-voltage differential probe DP6350D (3500 Vpk/500 MHz) isolated voltage

The DP6000D series high-voltage differential probes are high-voltage differential probes with floating ground measurement capability. They feature a high bandwidth of up to 500MHz, meeting the needs of most testing systems; a wide range of selectable measurement spans, with differential measurement voltage ranges suitable for most test circuits; users can enter the test mode to adjust the offset voltage, and if imbalance occurs after long-term use, users can enter this mode to adjust the offset to achieve zeroing; electronic touch buttons extend the lifespan; there is a 5MHz bandwidth limiting function available, and the 5MHz frequency bandwidth meets the measurement requirements of most switching frequency FETs in power supplies and can filter out higher-frequency noise and interference; it has audio-visual alarm functions and the sound alarm can be manually turned off, making it more user-friendly; USB power supply interface for more convenient and flexible use; the probe comes with a standard BNC output interface, which can be used with oscilloscopes from any manufacturer (requires the oscilloscope input impedance to be set to 50Ω (preferably using the internal 50Ω of the oscilloscope), or connect the standard through-type 50Ω load, and set the oscilloscope input impedance to 1MΩ) to measure the waveform of the circuit under test; automatic save function to prevent repeated operation after power loss. The probe has good common-mode noise suppression capability, with high input impedance and low capacitance at the input end, allowing accurate and high-speed measurement of differential voltage signals. It can be widely used in the research, debugging, or maintenance of switching power supplies, inverters, electronic ballasts, variable frequency home appliances, and other electrical power devices.