Cybertek high-voltage differential probe DP6700B(7000 V/300 MHz) isolated voltage

The DP6000B series high-voltage differential probes are high-voltage differential probes with floating ground measurement capabilities. They have a maximum bandwidth of 300MHz, meeting the needs of most testing systems; they offer a variety of selectable ranges, and their differential measurement voltage range satisfies the requirements of most test circuits. Users can enter a test mode to adjust the offset voltage; if the probe becomes unbalanced after prolonged use, users can enter this mode to adjust the offset and achieve zeroing. The electronic touch button extends the service life. There is a 5MHz bandwidth limit option; the 5MHz bandwidth meets the switching frequency measurement requirements of most FETs in switching power supplies and can filter out higher frequency noise and interference. The probe has both audible and visual alarm functions, and the audible alarm can be manually turned off, making the design more user-friendly. It has a USB power supply interface for more convenient and flexible use. The probe is equipped with a standard BNC output interface, compatible with oscilloscopes from any manufacturer (the oscilloscope input impedance must be set to 1MΩ; if 50Ω is selected, the attenuation factor will be doubled) to measure the waveforms of the circuit under test. It has an automatic save function to prevent repeated operations after power loss. The probe provides good common-mode noise suppression, with high input impedance and low capacitance at the input, allowing accurate and high-speed differential voltage measurements. It can be widely used in the research, debugging, or maintenance of switching power supplies, inverters, electronic ballasts, variable frequency home appliances, and other electrical power devices.