PEM
Categories
Probemart.com | Probes, current sensors & calibration sources for pulsed-power testing
Bookmark
PEM
Categories

Brand: PEM
Origin: UK
PEM Rogowski Coil CWT-Ultra-mini UM Datasheet datasheet 1.7mm.pdf
PEM CWTUM Rogowski Coil _accuracy-Probemart.pdf
PEM CWT Rogowski Coil Technical Note - Low-Frequency Performance CWT-Technical-notes-Low-Frequency-performance-Probemart.pdf
PEM CWT Rogowski Coil Technical Note - Delay and Rise Time CWT Technical Note – Delay and Rise TimeProbemart.pdf
PEM CWT Rogowski Coil Application Note application_notes-Probemart.pdf
PEM CWT Integrator Module Fuse Replacement Instructions for CWT Integrator Module Fuse ReplacementProbemart.pdf
PEM-CWTUM Rogowski Coil Technical Note -HighFrequency Probemart.pdf
PEM CWTUM Rogowski Coil CWTUM Gain and Phase Error Charts-Probemart.pdf
PEM CWTUM Temperature-testing-Probemart.pdf
PEM CWT Application Article High Performance Rogowski Current Transducers-W.F.Ray C.R.Hewson Probemart.pdf
PEM CWT Rogowski Coil Immunity to Coupled Voltage Interference Technical Note CWT-Technical-notes-Voltage-immunity-Probemart.pdf
PEM Rogowski Coil - A Next-Generation Current Probe for High-Speed, High-Power Measurements -Chrise Hewson.pdf
PEM- Rogowski Coil Practical Fast-Switching Current Measurement in Power Electronics Chris Hewson, APEC-March-2015.pdf
PEM CWT Minimum Measurable Current Application Article -Probemart.pdf
PEM CWT Accurate Measurement in High-Power Motor Power Conversion Application -Probemart.pdf
CWT Ultra mini (CWT UM) is the smallest Rogowski coil in the PEM product line. The maximum coil cross-sectional diameter is 1.7mm, small enough to pass through the pins of a semiconductor.。
With a bandwidth of up to 30 MHz (-3 dB) and excellent high-frequency performance over a wide temperature range, the CWT Ultra Mini is an ideal choice for measuring square and sine waveforms.
————————————————————————————
CWT Ultra mini Main Performance Parameters:
peak current: 30A - 6kApeak value
Output: ±6.0 V (full scale)
High frequency bandwidth (-3dB): 30MHz
accuracy (typical value): At the center position of the coil, it can reach up to ±0.2%
Operating temperature range: 0°C to 40°C (integrator); –40°C to 125°C (coil leads)
Coil length: 80mm (customizable length)
Coil insulation: 1.2 kV peak value
Coil wire diameter: 1.7mm
Lead length: 1 m (custom lengths available)
Power supply: AA battery or 12V DC power adapter
————————————————————————————
CWT Ultra mini Main Features:
Traceable calibration data (including certificate)
Non-contact measurement has no effect on the circuit under test
No magnetic material means excellent linearity
Fully isolated from DC current, enabling measurement of small ripple currents on large DC currents
Excessive current range will not cause damage (as long as it does not exceed the absolute maximum di/dt)
——— Related Applications ———
——— Related Products ———
PMK FireFly®FF-1500A optically isolated probe 1.3 GHz/1.5 GHz high CMRR (180 dB) high-voltage 2500 V double-pulse VGS gate /VDS drain voltage
IWATSU multi-channel high-voltage high-frequency optically isolated measurement probe Isolation SE-6000 remote UHV safety test system
CIC high-voltage differential probe DP20-20K-LVC high-precision 0.1% high-frequency isolated high CMRR 20 kV
| Parameter | Value |
|---|---|
| Peak Current | 30 A |
| High Frequency Bandwidth | 30 MHz |
| Low Frequency Cut-off | 150 Hz |
| Frequency Bandwidth | 30 MHz |
| Peak di/dt | 2 kA/µs |
| Droop Rate | 85 %/ms |
| Sensitivity | 200 mV/A |
| Noise | 20 mV (p-p, peak-to-peak) |
| Coil Withstand Voltage | 1.2 kV |
| Operating Temperature | -40~+125 °C |
| Zero Adjustment | No |
| Coil Diameter | 1.2 mm |
| Coil Length | 80 mm (up to 150 mm) |
| Cable Length | 1.0 m |