PEM
Categories
Probemart.com | Probes, current sensors & calibration sources for pulsed-power testing
Bookmark
PEM
Categories

PEM Rogowski Coil CWT-CWTHF Datasheet datasheet.pdf
PEM CWT Rogowski Coil Technical Note - Low-Frequency Performance CWT-Technical-notes-Low-Frequency-performance-Probemart.pdf
PEM CWT Rogowski Coil Technical Note - Delay and Rise Time CWT Technical Note – Delay and Rise TimeProbemart.pdf
PEM CWT Rogowski Coil Application Note application_notes-Probemart.pdf
PEM CWT Integrator Module Fuse Replacement Instructions for CWT Integrator Module Fuse ReplacementProbemart.pdf
PEM CWT Application Article High Performance Rogowski Current Transducers-W.F.Ray C.R.Hewson Probemart.pdf
PEM CWT Minimum Measurable Current Application Article -Probemart.pdf
PEM CWT Accurate Measurement in High-Power Motor Power Conversion Application -Probemart.pdf
PEM CWT Rogowski Coil Immunity to Coupled Voltage Interference Technical Note CWT-Technical-notes-Voltage-immunity-Probemart.pdf
PEM Rogowski Coil - A Next-Generation Current Probe for High-Speed, High-Power Measurements -Chrise Hewson.pdf
PEM- Rogowski Coil Practical Fast-Switching Current Measurement in Power Electronics Chris Hewson, APEC-March-2015.pdf
CWT wideband high-current Rogowski coils mainly include: CWT standard series, CWT LF low-frequency series, CWT mini series, CWT miniHF series, CWT Mini 50HF, CWT Ultra Mini, CWT LF, and other products.
_________________________________________________
Main performance parameters of the CWT standard model:
Peak current: 30 A - 600 kA peak
Output: ±6.0 V (full scale); high-frequency bandwidth (-3 dB): 16 MHz
Accuracy (typical): up to ±0.2% at the coil center position
Operating temperature range: 0 ℃ to +40 ℃ (integrator); –20 ℃ to +100 ℃ (coil + lead)
Coil length: 300, 500, 700, or 1000 mm (custom lengths available)
Coil insulation: 10 kV peak
Coil wire diameter: 8.5 mm
Lead length: 2.5 m or 4 m (custom lengths available)
Power supply: AA battery or 12 V DC power adapter
_______________________________________________________
Main features of the CWT standard model:
Traceable calibration data (including certificate)
Non-contact measurement has no effect on the circuit under test
No magnetic material means excellent linearity
Complete DC current isolation; can measure small ripple currents on large DC currents
Exceeding the current range will not cause damage(not exceeding the absolute maximum di/dt)
——— Related Applications ———
——— Related Products ———
PMK FireFly®FF-1500A optically isolated probe 1.3 GHz/1.5 GHz high CMRR (180 dB) high-voltage 2500 V double-pulse VGS gate /VDS drain voltage
IWATSU multi-channel high-voltage high-frequency optically isolated measurement probe Isolation SE-6000 remote UHV safety test system
CIC high-voltage differential probe DP20-20K-LVC high-precision 0.1% high-frequency isolated high CMRR 20 kV
| Parameter | Value |
|---|---|
| Peak Current | 12000 A |
| High Frequency Bandwidth | 16 MHz |
| Low Frequency Cut-off | 0.4 Hz |
| Frequency Bandwidth | 16 / 12.5 / 10 / 8 MHz (300 / 500 / 700 / 1000 mm) (by coil length) |
| Peak di/dt | 40 kA/µs |
| Droop Rate | 0.35 %/ms |
| Sensitivity | 0.5 mV/A |
| Noise | 3 mV (p-p, peak-to-peak) |
| Coil Withstand Voltage | 10 kV |
| Operating Temperature | -20~+100 °C |
| Zero Adjustment | No |
| Coil Diameter | 8.5 mm |
| Coil Length | 300~1000 mm |
| Cable Length | 1 / 2.5 / 4 m |