Probemart.com | Probes, current sensors & calibration sources for pulsed-power testing

Bookmark

Home > Products > Instruments

PMK

PMK BumbleBee 2000V 400MHz High-Voltage Differential Probe, 500:1, 6m

Name: PMK BumbleBee 2000V 400MHz High-Voltage Differential Probe, 500:1, 6m
Brand: PMK

Brand: PMK

Origin: Germany

2000V 差分输入、400MHz 带宽、500:1 衰减的高压差分探头，4档可切换量程，6m 线缆。适用于 SiC/GaN 双脉冲 VDS、开关电源与逆变器测量。

Support

Compare

Downloads

PMK High-Frequency High-Voltage Differential Probe BumbleBee Datasheet.pdf

Overview

2000V 差分输入、400MHz 带宽、500:1 衰减的高压差分探头，4档可切换量程，6m 线缆。适用于 SiC/GaN 双脉冲 VDS、开关电源与逆变器测量。

优势应用：SiC/GaN双脉冲VDS测量;开关电源;电机驱动/逆变器;IGBT电路;变频器;4档量程兼顾低噪与分辨率

资料来源：(P1) pmkamerica.com/collections/bumblebee

——— Related Applications ———

Danisense DCCT Ultra-Precision DC Current Sensors: How They Work

SiC and IGBT Dynamic Double-Pulse Testing: Procedure and Pitfalls

——— Related Products ———

PMK FireFly®FF-1500A optically isolated probe 1.3 GHz/1.5 GHz high CMRR (180 dB) high-voltage 2500 V double-pulse VGS gate /VDS drain voltage

IWATSU multi-channel high-voltage high-frequency optically isolated measurement probe Isolation SE-6000 remote UHV safety test system

CIC high-voltage differential probe DP20-20K-LVC high-precision 0.1% high-frequency isolated high CMRR 20 kV

Specifications

Parameter	Value
Order Number	880-106-501
Attenuation Ratio (optional)	500:1 / 250:1 / 100:1 / 50:1 (± 1 % guaranteed)
Bandwidth (-3 dB), small signal	250:1, 500:1: 400 MHz; 100:1, 50:1: 400 MHz
Rise Time (10 %-90 %), small signal	250:1, 500:1: 0.9 ns; 100:1, 50:1: 1.0 ns
Max Rated Input Voltage	2000 V rms / 6000 V transient overvoltage (no measurement category)
CAT Rating	1000 V CAT III
Pollution Degree	2
Max Differential Input Voltage	500:1 ± 2000 V; 250:1 ± 1000 V; 100:1 ± 400 V; 50:1 ± 200 V (DC + AC peak)
Common Mode Voltage	± 2000 V peak (1400 V rms)
DC Gain Accuracy	500:1, 250:1: ± 0.35 %; 100:1, 50:1: ± 0.7 %
Propagation Delay	12 ns (2 m) / 28 ns (6 m) / 32.5 ns (7 m), ± 0.5 ns
Noise (AC rms)	500:1, 250:1: 75 mV rms; 100:1, 50:1: 55 mV rms
Input Impedance (each side to GND)	5 MΩ ∥ 5 pF
Differential Input Capacitance	2.5 pF
Input Capacitance (each side to GND)	5 pF
Differential Input Impedance	10 MΩ ∥ 2.5 pF
CMRR (Common Mode Rejection Ratio)	DC: 80 dB; 100 kHz: 70 dB; 3.2 MHz: 62 dB; 10 MHz: 50 dB; 50 MHz: 45 dB; 100 MHz: 40 dB; 400 MHz: 35 dB
Input Coupling (measuring instrument)	50 Ω
Offset Correction Range	± 4 V (output)
Offset Resolution	min. 13 bit / V (min. 1 mV)
Offset Drift	150 µV / °C
Cable Length	6 m
Input Lead Length	25 cm
Input Lead Connector	2 mm x 4 mm (male)
Output Connector	BNC (male)
Weight (probe only)	370 g (probe only)
Power Supply	PS-02 / PS-03 power supply (USB, optional LAN) or AP-01 battery pack (1 channel, > 8 h)
Operating Temperature	0 °C ~ +50 °C
Storage Temperature	-40 °C ~ +71 °C
Maximum Relative Humidity	Operating: 80 % RH up to +31 °C, decreasing linearly to 40 % at +50 °C (non-condensing); non-operating: 95 % up to +40 °C
Altitude	Operating: up to 2000 m; non-operating: up to 15000 m
Calibration	factory-optional ISO 17025 calibration (initial or re-calibration)
DC Accuracy	± 0.35 %

Expand

* Specifications are subject to change without notice.