Probemart.com | Probes, current sensors & calibration sources for pulsed-power testing

Bookmark Bookmark
Home > Products > Instruments
PMK fixture 3D probe SKID series deg mea PMK Catalog
PMK fixture 3D probe SKID series deg measurement
  • PMK fixture 3D probe SKID series deg measurement

PMK fixture 3D probe SKID series deg measurement

Brand: PMK

Origin: Germany

SKID 系列是 PMK 的 PCB 测试与调试定位平台,提供 S(适配 3U PCB)、M(适配 6U PCB)、L(大于 6U 的任意 PCBA)三种框架尺寸,对应 225×225mm、305×305mm、405×365mm。采用 PTFE 滑块与 PCBA 垫块,滑动顺滑且不划伤板面;单手操作释放杆即可无级滑动,PCBA 悬空 10mm 便于背面布线。框架四周预留 M6 螺纹,可安装测试设备、照明、放大镜与相机,低重心设计可承载较大较重的被测件,用于免手扶测试、调试与环境试验。
Overview


SKID® is a unique platform that meets various PCBA testing and debugging requirements within a single project.

It offers a modular design that allows users to expand SKID according to their needs.

The framework comes in three versions: SKIDS provides a clamping width of at least 160x160 mm, suitable for a 3U standard PCB form factor; SKID M is suitable for 6U cards; SKID L has a clamping width of 300x340 mm. Of course, smaller boards can also be tested. PCBA spacers can be positioned to clamp most geometries, even inconvenient non-standard shapes that are typically difficult to secure.

The PCBA is positioned 10 mm above the rack for ease of operation. SKID itself sits on a 90 mm base, allowing operation from both the top and bottom. The rack is surrounded by standard M6 threads for mounting equipment such as probe positioning devices, lights, or other accessories.

Depending on the configuration, SKID can be used for environmental testing in climate chambers, with a temperature range from -55 to 150°C.



Key Features:

  • Hands-free testing and debugging

  • Intuitive clamping system

  • Fast and versatile setup

  • Environmental testing




SKID comes in three sizes. The S type is for 3U PCBs, M type for 6U PCBs, and L type for any PCBA larger than the 6U standard. Because the frame consists of only a few parts, SKID can be set up in one go. M6 threads run throughout the frame, allowing the installation of multiple accessories, such as testing equipment, lighting, magnifiers, and even cameras to record or stream video, such as thermal images. SKID's low center of gravity allows installation of even larger and heavier equipment.


The release lever of SKID is designed for one-handed use and smooth, stepless sliding. PTFE sliders provide smooth movement across the frame surface.

Additionally, SKID uses PCBA spacers made of PTFE, allowing users to clamp PCBAs in various positions. Another benefit is that the spacers provide a 10 mm gap, positioning the PCBA above the frame and providing some extra space.


Specifications

11102.png

bc132e4a-0244-410b-b9a9-78486bfb9895.png

Parameter Value
Specification SKID S (3U PCB), SKID M (6U PCB), SKID L (any PCBA larger than 6U)
Thermocouple Type PCB test and debugging platform (hands-free)
Model SKID Series
Frame Size S: 225 x 225 mm; M: 305 x 305 mm; L: 405 x 365 mm (as illustrated)
Material & Sliding PTFE sliders and PCBA support blocks: smooth sliding without scratching the board
Clamping one-hand release lever, stepless sliding, PCBA raised 10 mm for wiring access
Threaded Interface M6 threads around the frame for test equipment, lighting, magnifier and camera
Center of Gravity low center of gravity, carries large and heavy DUTs
Typical Applications hands-free test and debugging, environmental testing, rapid general setup
Expand PMK fixture 3D probe SKID series deg mea

* Specifications are subject to change without notice.