Cybertek high-voltage differential probe DP6150 (1500 V/70 MHz) isolated voltage

The DP6000 series high-voltage differential probes are high-voltage differential probes with floating ground measurement capabilities. Their bandwidth reaches up to 300MHz, meeting the needs of most testing systems. They offer a variety of measurement ranges, with differential measurement voltage ranges that satisfy the requirements of most test circuits. Users can enter the test mode to adjust the bias voltage; if offset occurs after long-term use of the probe, users can enter this mode to adjust the bias and achieve zeroing. The electronic touch buttons extend the service life. The probes have a 5MHz bandwidth limit option; the 5MHz frequency bandwidth meets the measurement needs of FET switching frequencies in most switching power supplies and can filter out higher-frequency noise and interference. They feature audio-visual alarms, with the option to manually turn off the sound alarm, providing a more user-friendly design. The USB power interface offers more convenient and flexible use. The probes are equipped with standard BNC output interfaces, compatible with oscilloscopes from any manufacturer (the oscilloscope input impedance should be set to 1MΩ; when 50Ω is selected, the attenuation factor will be further doubled), for measuring the waveform of the tested circuit. An automatic save function prevents repeated operations in case of power loss. The probe has good common-mode noise suppression capabilities, with high input impedance and low capacitance at the input, allowing accurate and high-speed measurement of differential voltage signals. It can be widely used in the research, debugging, or maintenance of switching power supplies, inverters, electronic ballasts, variable-frequency home appliances, and other electrical power devices.