HBK
Categories
Probemart.com | Probes, current sensors & calibration sources for pulsed-power testing
Bookmark
Product Categories
- Home
- Selection Guide
-
Solutions
SiC & GaN Device Double-Pulse Testing UHV & Pulsed High-Voltage Measurement Plasma & Pulsed Power Lithography, Ion Implantation & Accelerator High Voltage Wind Turbine Generator & Transformer Efficiency Measurement EV & Renewable Energy Inverter R&D MRI Gradient Current Measurement Power Device Junction Temperature (Tj) Measurement High-Frequency & Fast Pulsed Current Grid Operation: HVDC & Solid-State Transformers Probe Knowledge Base
- Downloads
- Test Reports
- About Us
HBK
Overview
This device provides external fiber optic isolation for existing measurement systems. The ISOBE5600r isolation system consists of a transmitter unit (ISOBE5600t or ISOBE5600tm), which is connected to the SOBE5600r receiver via a fiber optic cable.
Both the input and output are analog signals, making the system as easy to use as a probe or sensor. No software support is required, nor is there any need to store or record data. The intuitive front panel control interface allows for easy complete setup of the probe system.
The ISOBE5600tm features 1.8 kV RMS continuous power isolation, while the ISOBE5600t offers a higher level of isolation options and can operate on battery power. With a single battery, the ISOBE5600t operates for 15 hours. If an optional second battery is used, the operating time can be extended to 30 hours.
Features:
4 analog channels
Isolated unbalanced differential input
Input range from 100 mV to 50 V
ISOBE5600t battery powered
ISOBE5600tm continuous power; 1.8 kVRMS isolation
Digital fiber optic link
BNC input
Cost-effective
Analog input to analog output
Isolation for existing systems
——— Related Applications ———
——— Related Products ———
PMK FireFly®FF-1500A optically isolated probe 1.3 GHz/1.5 GHz high CMRR (180 dB) high-voltage 2500 V double-pulse VGS gate /VDS drain voltage
IWATSU multi-channel high-voltage high-frequency optically isolated measurement probe Isolation SE-6000 remote UHV safety test system
CIC high-voltage differential probe DP20-20K-LVC high-precision 0.1% high-frequency isolated high CMRR 20 kV
Specifications
ISOBE5600r 性能概览（Capabilities Overview）
| 参数项 | 规格说明 |
|---|---|
| Receiver model（接收器型号） | ISOBE5600r |
| Transmitter models（发射机型号） | ISOBE5600t and ISOBE5600tm |
| Maximum sample rate per channel（单通道最大采样率） | 100 MS/s (ADC and DAC) |
| ADC resolution（ADC 分辨率） | 14 bit (ADC and DAC) |
| Memory per receiver（单接收器内存） | 0 MB |
| Analog channels（模拟通道） | 4 outputs per receiver. One output per transmitter1 input per transmitter |
| Isolation（隔离特性） | Yes; transmitter to receiver and transmitter to earth |
| Input type（输入类型） | Isolated, unbalanced differential inputs |
| Probes（探头支持） | Not supported |
| Sensors（传感器支持） | Not supported |
| TEDS | Not supported |
| Real-time cycle based calculators（基于周期的实时计算器） | Not supported |
| Real-time formula database calculators (option)（可选：实时公式数据库计算器） | Not supported |
| EtherCat® output（EtherCat 输出） | Not supported |
| Digital Event/Timer/Counter（数字事件 / 定时器 / 计数器） | Not supported |
ISOBE5600 模拟输入到模拟输出（Analog-in to Analog-out）
| 参数项 | 规格说明 |
|---|---|
| Bandwidth（带宽） | 20 MHz @ −3 dB (wideband)10 MHz @ −3 dB (filtered) |
| Pass band flatness (wideband)（通带平坦度，宽带模式） | ±0.3 dB (±3.4%); DC to 1 MHz±1 dB (±11%); 1 MHz to 10 MHz |
| Rise time (wideband)（上升时间，宽带模式） | 18 ns |
| CMRR（共模抑制比） | 100 dB @ 80 Hz |
| Range error (DC Offset)（量程误差 / 直流失调） | 0.3% Full Scale ± 50 µV RTI⁽¹⁾ |
| Noise (RMS)（噪声，均方根） | 0.07% Full Scale ± 0.1mV RTI⁽¹⁾ |
| Non-linearity（非线性度） | ±0.05% |
| Propagation delay（传输延迟） | 650 ns ± 50 ns from input to output with 1 meter of optical cable5 ns per added meter of additional cable length |
ISOBE5600r 模拟输入（ISOBE5600t & ISOBE5600tm 发射机）规格表
| 参数项 | 规格说明 |
|---|---|
| Analog Input ISOBE5600t & ISOBE5600tm (Transmitter) | |
| Channels | 1 |
| Connector | 1; Metal BNC |
| Input type | Single-ended to isolated common (unbalanced differential) |
| Input Coupling | |
| Coupling modes | AC / DC / GND |
| AC coupling frequency | 1.6 Hz (±10%); - 3 dB |
| Impedance | 1 MΩ (± 2%) / 38 pF (± 5%) |
| Ranges | ± 100 mV, ± 200 mV, ± 500 mV, ± 1 V, ± 2 V, ± 5 V, ± 10 V, ± 20 V and ± 50 V |
| Range error (DC Offset) | |
| Wideband | 0.1% of Full Scale ± 50 µV |
| Bessel filter | 0.1% of Full Scale ± 50 µV |
| Offset error drift | ISOBE5600t: ±(60 ppm + 10 µV)/°C (±(36 ppm + 6 µV)/°F)ISOBE5600tm: ±(100 ppm + 10 µV)/°C (±(60 ppm + 6 µV)/°F) |
| Reading error (DC Gain) | |
| Wideband | 0.1% of reading ± 50 µV |
| Bessel filter | 0.1% of reading ± 50 µV |
| Gain error drift | ISOBE5600t: ±100 ppm/°C (±60 ppm/°F)ISOBE5600tm: ±(100 ppm + 10 µV)/°C (±(60 ppm + 6 µV)/°F) |
| RMS Noise (50 Ω terminated) | |
| Wideband | 0.05% of Full Scale ± 100 µV |
| Bessel filter | 0.05% of Full Scale ± 100 µV |
| Bandwidth | > 25 MHz @ − 3 dB |
| Anti-alias filter | Lowpass at 10 MHz; ± 1 MHz 6th order Bessel |
| CMRR | 100 dB @ 80 Hz |
| Input Bias current | |
| Rise time | 14 ns |
| Input overload protection | |
| Maximum nondestructive voltage | ± 125 V DC; Ranges |
| Overload recovery time | Restored to 0.1% accuracy in less than 50 ns after 200% overloadRestored to 10% accuracy in less than 10 ns after 200% overload |
规格参数表（Channel to Channel Phase Match / Analog Output / Fiber Optic Link）
Channel to Channel Phase Match
| 参数项 | 规格说明 |
|---|---|
| 说明 | Using different filter selections (Wideband or Bessel) will lead to phase mismatches between channels |
| Channel to Channel phase difference | Maximum 10 ns; using identical optical cable lengths |
| Cable length compensation | No |
| Cable delay | 5 ns/m |
Analog Output ISOBE5600r (Receiver)
| 参数项 | 规格说明 |
|---|---|
| Channels | 4; 1 per transmitter channel (ISOBE5600t and/or ISOBE5600tm) |
| Connector | 4; Metal BNC, one BNC per channel on receiver front panel |
| Conversion | 100 MS/s DAC (digital to analog converter) per channel |
| DAC resolution | 14 bit (0.006%) |
| Outputs | |
| Output filter | Lowpass 40 MHz @ −3 dB; 6th order Bessel reconstruction filter |
| Output impedance | 50 Ω ± 2% |
| Calibrated Full Scale output level | ±2 V; 1 MΩ load |
| Non calibrated Full Scale output level | ±1 V; 50 Ω load (Additional output error: add 1% + 1/2 of the error of load resistor) |
Fiber Optic Link
| 参数项 | 规格说明 |
|---|---|
| Connector | LC duplex |
| Light source | |
| Laser | Class 1 laser product |
| Transfer rate | 2 Gbit/s |
| Wavelength | 850 nm |
| Cable | |
| Isolation | 10¹⁵ Ω/m |
| Maximum length | 50 m (164 ft); using ISO/IEC 11801 type OM2, OM3 or OM4 cable and no extra couplers⁽¹⁾ |
| Type | Duplex Multi Mode, 50/125 µm, ISO/IEC 11801 type OM2 |
Expand
* Specifications are subject to change without notice.