PEM
Categories
Probemart.com | Probes, current sensors & calibration sources for pulsed-power testing
Bookmark
PEM
Categories

Broadband AC current probes with BNC output are connected to most types of oscilloscopes or data acquisition devices.
CWTUM-F (1.2 mm thick) and the electrostatic shielded version, CWTUMHF-F (1.7 mm thick), are an extension of the original CWT Ultra-mini
from PEM, and the novel mechanical construction can reduce the overall size
of the Rogowski coil. Therefore, the probe produces impact testing for circuits, which simplifies measurements in dense power electronics circuits region.
main features:
new "fork" structure, coil length 55mm.
Wide operating temperature range from -40°C to 125°C.
rating from 60A to 12kA.
Coil insulation rating 1.2kV peak.
Peak di/dt capability up to 100kA/S.
Thin version with a 1.2mm cross-sectional diameter. HF (-3dB) 20MHz
shielded "HF" version, with a 1.7mm cross-sectional diameter in cross-sectional area. Excellent voltage tolerance HF(-3dB) 30MHz
Application field:
Switching current waveforms in power electronics circuits:
MOSFET or IGBT devices, small sizes down to TO-220, D2PAK, and other SMT power devices
to measure power loss on semiconductor bonding lines in power devices.
Monitors current in small inductors, capacitors, lightning protection circuits, etc.
Measuring low AC currents (such as monitoring capacitor ripple) in
currents. Development and diagnosis of power converters.
Measuring power frequency from high-frequency sine, pulse, or transient currents in RF applications
——— Related Applications ———
——— Related Products ———
PMK FireFly®FF-1500A optically isolated probe 1.3 GHz/1.5 GHz high CMRR (180 dB) high-voltage 2500 V double-pulse VGS gate /VDS drain voltage
IWATSU multi-channel high-voltage high-frequency optically isolated measurement probe Isolation SE-6000 remote UHV safety test system
CIC high-voltage differential probe DP20-20K-LVC high-precision 0.1% high-frequency isolated high CMRR 20 kV
