Probemart.com | Probes, current sensors & calibration sources for pulsed-power testing

Bookmark Bookmark
Search
nav Product Categories
Home > Products > Instruments
YOKOGAWA FET probe 700939 high-frequency YOKOGAWA

Categories

Voltage Probe Isolated Voltage Probe Current Probe Isolated Current Probe Standard Temperature Sensor Isolated Temperature Sensor Magnetic Field Sensor Optical Sensor Acoustic Sensor Probe Calibration System Integrated Test System Fixtures & Accessories
Catalog
YOKOGAWA FET probe 700939 high-frequency active 900 MHz/40 Vpk
  • YOKOGAWA FET probe 700939 high-frequency active 900 MHz/40 Vpk

YOKOGAWA FET probe 700939 high-frequency active 900 MHz/40 Vpk

Brand: YOKOGAWA

Origin: Japan

High-frequency bandwidth 900 MHz voltage range 10 Vp-p(DC+AC peak +/-10V) non-destructive input +/-40V (DC+AC
Support Compare Compare
Downloads
YOKOGAWA FET 700939 Manual manual.pdf YOKOGAWA FET 700939 Manual manual.pdf
Overview

High-frequency bandwidth 900MHz

Input voltage range 10Vp-p (DC and AC peak should be within ±10V)

Non-destructive input voltage range ±40V (DC and AC peak)


700939 FET is an active probe

——— Related Applications ———

Danisense DCCT Ultra-Precision DC Current Sensors: How They Work Danisense DCCT Ultra-Precision DC Current Sensors: How They Work SiC and IGBT Dynamic Double-Pulse Testing: Procedure and Pitfalls SiC and IGBT Dynamic Double-Pulse Testing: Procedure and Pitfalls

——— Related Products ———

PMK FireFly®FF-1500A optically isolated probe 1.3 GHz/1.5 GHz high CMRR (180 dB) high-voltage 2500 V double-pulse VGS gate /VDS drain voltage PMK FireFly®FF-1500A optically isolated probe 1.3 GHz/1.5 GHz high CMRR (180 dB) high-voltage 2500 V double-pulse VGS gate /VDS drain voltage IWATSU multi-channel high-voltage high-frequency optically isolated measurement probe Isolation SE-6000 remote UHV safety test system IWATSU multi-channel high-voltage high-frequency optically isolated measurement probe Isolation SE-6000 remote UHV safety test system CIC high-voltage differential probe DP20-20K-LVC high-precision 0.1% high-frequency isolated high CMRR 20 kV CIC high-voltage differential probe DP20-20K-LVC high-precision 0.1% high-frequency isolated high CMRR 20 kV
Specifications
Item Specifications
Frequency bandwidth DC-900MHz applicable to probe 1
Attenuation rate 10:1 ±2%, when connected to a 50 ohm ±1% resistor 1
Output offset voltage ±2mV (±20mV when converted to the input terminal) 1
Input Voltage Range 10Vp-p (DC ACpeak value should be within ±10V) 1,2
Lossless input voltage range ±40V (DC ACpeak value) 3
Input resistance About 2.5 Mohm
Input capacity About 1.8 pF
Total cable length 1.5m (probe cable)

1m (power supply cable)
Weight About 180g
Operating Temperature 5~40 ℃
Environmental working humidity 20~80% RH (non-condensing)
Ambient storage temperature -20~60 ℃
Environmental storage humidity 20~80% RH (non-condensing)
power supply Voltage ±12V ±1V

(Available range: 11~13V or -11~-13V)
power supplyElectric current The current of terminal power supply is less than 125mA 2
EMC Radiation complies with standard: EN61326 Class A

Anti-interference compliance standard: EN61326

Sensitivity under anti-interference conditions

noise Increase±200mV4


1Reference working conditions: ambient temperature 23±5°C; ambient humidity 55±10%; after 30 minutes of power-on.

2: When the power supply voltage is ±12V.

3The relationship between frequency bandwidth and input voltage reduction is shown in the figure on the right.

4: Test conditions:

Set the frequency bandwidth to 20 MHz, and the input coupling of oscilloscope to 50 ohms.

Terminate the probe with a 50 ohm resistor. Connect a ferrite core (TDK: ZCAT2035-0930A, YOKOGAWA part number: A1190MN) to all ends of the cable.


Expand YOKOGAWA FET probe 700939 high-frequency

* Specifications are subject to change without notice.