PEM
Categories
Probemart.com | Probes, current sensors & calibration sources for pulsed-power testing
Bookmark
PEM
Categories

Brand: PEM
Origin: UK
PEM Rogowski Coil CWT-Ultra-mini UM Datasheet datasheet.pdf
PD-200X Overview (V2.0).pdf
PEM CWTUM Rogowski Coil _accuracy-Probemart.pdf
PEM CWT Rogowski Coil Technical Note - Low-Frequency Performance CWT-Technical-notes-Low-Frequency-performance-Probemart.pdf
PEM CWT Rogowski Coil Technical Note - Delay and Rise Time CWT Technical Note – Delay and Rise TimeProbemart.pdf
PEM CWT Rogowski Coil Application Note application_notes-Probemart.pdf
PEM CWT Integrator Module Fuse Replacement Instructions for CWT Integrator Module Fuse ReplacementProbemart.pdf
PEM-CWTUM Rogowski Coil Technical Note -HighFrequency Probemart.pdf
PEM CWTUM Rogowski Coil CWTUM Gain and Phase Error Charts-Probemart.pdf
PEM CWTUM Temperature-testing-Probemart.pdf
PEM CWT Application Article High Performance Rogowski Current Transducers-W.F.Ray C.R.Hewson Probemart.pdf
PEM CWT Minimum Measurable Current Application Article -Probemart.pdf
PEM CWT Accurate Measurement in High-Power Motor Power Conversion Application -Probemart.pdf
PEM CWT Rogowski Coil Immunity to Coupled Voltage Interference Technical Note CWT-Technical-notes-Voltage-immunity-Probemart.pdf
PEM Rogowski Coil - A Next-Generation Current Probe for High-Speed, High-Power Measurements -Chrise Hewson.pdf
PEM- Rogowski Coil Practical Fast-Switching Current Measurement in Power Electronics Chris Hewson, APEC-March-2015.pdf
CWT Ultra mini (CWT UM) is the smallest Rogowski coil in PEM products. The largest coil has a cross-sectional diameter of 1.7mm, small enough to pass through a semiconductor pin.
With a wide bandwidth up to 30MHz (-3dB) and a wide temperature range, outstanding high-frequency performance makes the CWT Ultra Mini an ideal choice for measuring pulse currents and sine waveforms in power electronics applications.
————————————————————————————
Main performance parameters of CWT Ultra mini:
peak current: 30A - 6kA peak
output: ±6.0V (full scale)
high-frequency bandwidth (-3dB): 30MHz
accuracy (typical): coil center position can reach up to ±0.2
%. Operating temperature range: 0°C to +40°C (integrator); –40°C to +125°C (coil + lead)
coil length: 80mm (customizable length)
coil insulation: 1.2kV peak
coil diameter: 1.7mm
lead length: 1m (customizable length)
power supply: AA battery or 12V DC power
————————————————————————————
> CWT Ultra mini Main features:
Traceable calibration data (including certificates)
Non-contact measurement has no effect on the tested circuit
No magnetic materials means excellent linearity
Fully isolated DC current, allowing testing of small ripple currents on large DC currents
Overcurrent range will not cause damage (as long as absolute maximum di/dt is not exceeded)
——— Related Applications ———
——— Related Products ———
PMK FireFly®FF-1500A optically isolated probe 1.3 GHz/1.5 GHz high CMRR (180 dB) high-voltage 2500 V double-pulse VGS gate /VDS drain voltage
IWATSU multi-channel high-voltage high-frequency optically isolated measurement probe Isolation SE-6000 remote UHV safety test system
CIC high-voltage differential probe DP20-20K-LVC high-precision 0.1% high-frequency isolated high CMRR 20 kV
| Parameter | Value |
|---|---|
| Peak Current | 30000 A |
| High Frequency Bandwidth | 30 MHz |
| Frequency Bandwidth | 30 MHz |
| Sensitivity | 0.2 mV/A |
| Noise | 5 mV (p-p, peak-to-peak) |
| Coil Withstand Voltage | 1.2 kV |
| Operating Temperature | -40~+125 °C |
| Zero Adjustment | No |
| Coil Diameter | Max 1.7 mm |
| Coil Length | 80 mm |
| Cable Length | 1.0 m |