Danisense fluxgate current sensor DR5000UX-10V_7500A voltage output PPM high-precision AC/DC probe (DC/AC)

brand Danisense origin: Denmark. Danisense current sensors are based on zero flux gate sensor technology.

ultra-stable, high-precision (ppm level) flux gate technology current sensors are used for non-intrusive, isolated DC and AC current measurements.

flux gate sensors measure weak magnetic fields by utilizing the nonlinear relationship between magnetic induction intensity and magnetic field strength under saturation excitation of the high magnetic permeability core in the measured magnetic field. This physical phenomenon acts like a "gate" to the measured environmental magnetic field. Through this "gate," the corresponding magnetic flux is modulated and generates an induced electromotive force. This phenomenon is used to measure the magnetic field generated by the current, thereby indirectly achieving the purpose of measuring current. Flux gate sensors are based on the nonlinear magnetization characteristics of the iron core material. Their sensitive components are made of high-permeability, easily saturated materials, with two windings surrounding the core: one is the excitation coil and the other is the signal coil. Under the magnetization of the alternating excitation signal fl, the magnetic conductivity of the iron core undergoes periodic changes between saturation and unsaturation, causing the induction coils surrounding the core to induce signals that reflect the external magnetic field. Danisense is the industry benchmark for flux gate sensors. The high-tech Chinese company Hangzhi Technology uses multi-point zero magnetic flux patented technology and is a rising global brand in high-precision current measurement.

Advantages and Features:

• Maximum linear error /-7ppm

• 3-pin XLR mini connector for voltage output,

optimized

• for high immunity to external magnetic fields,

sensor core

• operating temperature sensor head 0-60°C, electronic product 0-45°C,

• aperture 150 mm

• The 2U 19 control unit features a universal (100-240V AC 50/60Hz) AC input voltage or 120-370V DC input voltage

.

• Danisense advanced sensor protection circuit ASPC

typical application

MPS

• stable power supply

• precision driver for particle accelerators

• Battery testing and evaluation system

,

• power measurement and power analysis, current calibration purposes