Teledyne LeCroy active differential probe D610-A-PB2 isolated D610-A-PL high-frequency 6GHz/2.5 Vpk

main features

•  6 GHz bandwidth model

• Up to 2.5Vpk-pk, ± 1.25V dynamic range and low noise

• ± 3V offset range

,

• low load and high impedance, minimal signal interference

,

• suitable for DDR2, DDR3, LPDDR2

• luxury soft

suitcases,

• and innovative QuickLink Architecture

:

• a variety of connection front-end soldering leads

• , optional adjustable position (Browser), front-end

• quick-connect wires

• , square pin leads

,

• high-temperature soldering leads

Differential probe (4-6 GHz) series accessories:

D410-A-PB2 - 4 GHz ProBus2 differential probe, with Dx10-SI soldering tip (1), Dx10-QC quick connect (1), and Dx10-SP square pin (1 

) D420-A-PB2 - 4 GHz ProBus2 differential probe, with Dx20-SI soldering tip (1), Dx20-QC quick connect (1), and Dx20-SP square pin (1 

) D610-A-PB2 - 6 GHz ProBus2 differential probe, with Dx10-SI soldering tip (1), Dx10-QC quick connect (1), and Dx10-SP square pin (1 

)D610-A-PL - 6 GHz ProLink differential probe with Dx10-SI soldering tip (1), Dx10-QC quick connect (1), and Dx10-SP square pin (1 

D620-A-PB2 - 6 GHz ProBus2 differential probe, with Dx20-SI soldering tip (1), Dx20-QC quick connect (1), and Dx20-SP square pin (1) 

D620-A-PL - 6 GHz ProLink differential probe with Dx20-SI soldering tip (1), Dx20-QC quick connect (1), and Dx20-SP square pin (1 

D400A-AT-PB2 - 4GHz ProBus2 differential probe with adjustable tip.  

D600A-AT-PB2 - 6GHz ProBus2 differential probe with adjustable tip. 

D600A-AT-PL 6 GHz ProLink differential probe with adjustable tip. 

WL-PBUS2 - WaveLink ProBus8 platform/cable assembly for 2-4 GHz WaveLink amplifiers. 

Dx10-PT-KIT - WaveLink Dx10-PT adjustable positioner tip kit. Includes XYZ positioner assembly with mechanical interconnect, adhesive kit, connection guide, handheld rod, and replacement pins (4)/socket (2). 

LPA-PBUS2 - ProLink to ProBus2 

Dx20-PT-KIT - WaveLink Dx20-PT adjustable positioner tip kit. Includes XYZ positioner assembly with mechanical interconnect, adhesive kit, connection guide, handheld rod, and replacement pins (4)/sockets (2).  

Dx10-HiTemp - Temperature extension cable for WaveLink Dx10. Includes 1 set of matching 30-inch high-temperature cable and 1 set of soldered tip wires. 

Dx20-HiTemp - Extended-temperature cable for WaveLink Dx20. Includes 1 set of matching 30-inch high-temperature cable and 1 set of soldered tip wires.  

DX10-QL-3SI - QuickLink Solder-In Starter Pack for Use with Dx10 Amplifier

D610-A-CCNIST - NIST calibration of D610-A. Includes test data. 

D620-A-CCNIST - NIST calibration of D620-A. Includes test data. 

NIST calibration of D400A-AT-CCNIST - D400A-AT. Includes test data. 

- NIST calibration of D600A-AT-CCNIST - D600A-AT. Includes test data.  

DX10-SI - Replacement solder tip lead group for D410/D610