Teledyne LeCroy high-frequency low-voltage differential probe DH13-PL type 13 GHz high-bandwidth isolated oscilloscope voltage

LeCroy high-frequency low-voltage differential probe DH series:

DH08-PB2 - 8 GHz differential probe with ProBus2 interface 

DH08-PL - 8 GHz differential probe with ProLink interface 

DH13-PL - 13 GHz differential probe with ProLink interface 

DH16-PL - 16 GHz differential probe with ProLink interface 

DH20-PL - 20 GHz differential probe with ProLink interface 

DH25-PX - 25 GHz differential probe with ProAxial interface 

DH30-PX - 30 GHz differential probe with ProAxial interface 

DH-CSPHY-PCIE5-CEMX16 - DH series tip - CrossSync PHY PCIe5 CEM x16 

DH-SI-HS - DH series high-sensitivity solder-in tip, 30 GHz BW, 2.0 Vpp range 

DH-SI - DH series solder-in tip, 30 GHz bandwidth, 3.5 Vpp range 

DH-HTEMP - DH series high-temperature solder-in tip, 16 GHz BW, 3.5 Vpp range 

DH-QL - DH series QuickLink adapter, 8 GHz bandwidth 

DH-QL-3SI - DH series QuickLink adapter kit with 3 x QL-SI tips 

DH - DH series PT browser tip, 16 GHz bandwidth, 3.5 Vpp range 

Key features

• 8 GHz to 30 GHz bandwidth models

• Low loading and high impedance, minimal signal interference

• 
  

• Various tip types:

• Standard and high-sensitivity 30 GHz solder-in tips

• High-temperature solder-in tip with 1 m lead

• QuickLink adapter for mixed-signal probing

• Handheld adjustable point-probe tip

• Front end for connecting the oscilloscope directly to CrossSync PHY protocol analyzer interposers

• Built-in tip identification for setup and accurate signal reproduction

• 
  

• Well suited for debugging and validation:

• DDR3/LPDDR3

• DDR4/LPDDR4/LPDDR4X

• DDR5

• Other high-speed serial interfaces

Teledyne LeCroy DH Series 8 to 30 GHz differential probes provide a combination of bandwidth, input range, and offset capability to meet any high-speed probing requirement, from debugging serial data interfaces to validating DDR memory systems. DH Series probes offer excellent loading characteristics and are calibrated with a custom 'fine-tuned' frequency response. Ultra-low loading and flat frequency response ensure accurate measurements.

Two 30 GHz solder-in tips let you choose either a 3.5 Vpp input range for general-purpose applications or high sensitivity with exceptionally low noise. Also available are a 1 m long 16 GHz high-temperature solder-in tip, a 16 GHz browser tip, and a QuickLink adapter for connecting mixed-signal probe tips. The same solder-in, high-temperature, and QuickLink tips are compatible with all DH Series probes and can be interchanged among any probe in the series, providing maximum flexibility in the lab. Each tip contains its own identification and calibration data for accurate signal reproduction and excellent ease of use.

The 30 GHz DH Series solder-in tips are very compact, facilitating access to signals on densely packed circuit boards; the 9 in lead length helps reach difficult-to-probe locations. The standard DH-SI solder-in tip has a 3.5 Vpp input range and is well suited for DDR memory and other general-purpose high-speed serial signal applications. For smaller signals where noise performance is critical, the DH-SI-HS high-sensitivity solder-in tip has a 2.0 Vpp input range and excellent noise performance.

For tests that require placing equipment in an environmental chamber, the DH-HITEMP head can separate the solder-in probe tip from the probe amplifier by up to 1 m. The head has 16 GHz bandwidth, a 3.5 Vpp input range, and an operating temperature range of -40°C to +125°C, making it well suited for environmental testing of various high-speed devices.

Where fast access to multiple test points is critical, the DH-PT browser head provides 16 GHz bandwidth in a convenient 'pencil' form factor. The included free-hand probe holder enables simple hands-free browsing.

CrossSync PHY technology enables waveforms from Teledyne LeCroy oscilloscopes to be displayed simultaneously with protocol analyzer traces, achieving full time correlation of electrical and protocol information. Through a series of interposers supporting CrossSync PHY, using a special DH-CSPHY probe tip, DH-series probes can be connected directly to high-speed signal lines.

The DH-QL adapter allows QuickLink solder-in probe tips to be used with any DH-series probe. For validation and debugging of embedded systems, these probes can be used for analog probing with DH-series probes and for digital acquisition with the HDA125 high-speed digital analyzer.

Mixed-signal flexibility

When connected to a Teledyne LeCroy analog differential probe, the QuickLink probe provides 8 GHz bandwidth and a flat, well-controlled frequency response. When used with the HDA125 for digital acquisition, they support 3 GHz bandwidth and offer industry-leading sensitivity. The HDA125 can acquire and analyze DDR command bus signals and other high-speed digital bus signals directly on standard oscilloscope channels together with time-correlated analog signals.