Rohde & Schwarz
Categories
Probemart.com | Probes, current sensors & calibration sources for pulsed-power testing
Bookmark
Product Categories
- Home
- Selection Guide
-
Solutions
SiC & GaN Device Double-Pulse Testing UHV & Pulsed High-Voltage Measurement Plasma & Pulsed Power Lithography, Ion Implantation & Accelerator High Voltage Wind Turbine Generator & Transformer Efficiency Measurement EV & Renewable Energy Inverter R&D MRI Gradient Current Measurement Power Device Junction Temperature (Tj) Measurement High-Frequency & Fast Pulsed Current Grid Operation: HVDC & Solid-State Transformers Probe Knowledge Base
- Downloads
- Test Reports
- About Us
Rohde & Schwarz
Downloads
Rohde&SchwarzRohde & Schwarz R&S®RT-ZD10_20_30 High-Frequency Low-Voltage Differential Probe Manual user manual.pdf
Rohde&SchwarzRohde & Schwarz R&S®RT-ZD40 High-Frequency Low-Voltage Differential Probe Manual user manual.pdf
Rohde&SchwarzRohde & Schwarz R&S®RT-ZZ-ZS-ZD-ZM-ZPR Datasheet datasheet.pdf
Overview
At higher clock rates, differential signals are generally used to effectively suppress common-mode interference and accurately transmit broadband signals.
Only by using differential probes can such signals be measured precisely.
Rohde & Schwarz active differential probes provide high input impedance, high common-mode rejection ratio, and low additive noise.
Main Features
Bandwidth: 200 MHz to 4.5 GHz
Input Impedance: up to 1 MΩ
Low Input Capacitance: less than 1 pF
Extremely Low Additive Noise
Integrated High-Precision DC Voltmeter (not available on some models)
——— Related Applications ———
——— Related Products ———
PMK FireFly®FF-1500A optically isolated probe 1.3 GHz/1.5 GHz high CMRR (180 dB) high-voltage 2500 V double-pulse VGS gate /VDS drain voltage
IWATSU multi-channel high-voltage high-frequency optically isolated measurement probe Isolation SE-6000 remote UHV safety test system
CIC high-voltage differential probe DP20-20K-LVC high-precision 0.1% high-frequency isolated high CMRR 20 kV
Specifications
| R&S® RT-ZD Series High-Frequency differential probe | |||||
| Model | Bandwidth | Maximum voltage | Attenuation ratio | Input impedance | Remarks |
| R&S®RT-ZD10 | 1.0 GHz |
Between signal sockets: ±5 V (±5 V Bias compensation); Signal Socketgrounding: ±8 V (±22 V) Bias compensation) |
10:1 | 1 MΩ || 0.6 pF | ProbeMeter and micro-control buttons can be used for instrument control, Rohde & Schwarzprobe interface, including the R&S®RT-ZA15 external attenuator; |
| R&S®RT-ZD20 | 1.5 GHz | 10:1 | 1 MΩ || 0.6 pF | R&S® ProbeMeter and micro-control buttons can be used for instrument control, Rohde & Schwarzprobe interface | |
| R&S®RT-ZD30 | 3 GHz | 10:1 | 1 MΩ || 0.6 pF | ||
| R&S®RT-ZD40 | 4.5 GHz | 10:1 | 1 MΩ || 0.4 pF | ||
Expand
* Specifications are subject to change without notice.